ENGLISH
•
The audio signal input
to
the HDMI input connector
cannot
be played on the
AVR-1609. Input the audio
signal to the digital audio
input connector or analog
audio input connector.
HOMI
OUT
Carefully check the left
(L)
and
right (A) channels and the inputs and outputs, and
be
sure
to
interconnect
correctly.
Connecting the Playback Components
Select the terminal to use
and
connect the device.
DVDplayer
---
AUDIO
---
AUOIO
COAXIAl.
.
OUT
'OUT
~
. R
...
~~-~
..
The
same method
can
be used to connect
an
HOP
(High-Definition
Player)
such
as
a Blu-ray Disc
player.
..
When using
an
optical cable for the digital audio connection, make the settings at "System Setup"
- "Input Setup" - "Digitalin Assign" (l3T"page
25).
,~[.na
Because video signals
are
output from the AVR-1609's monitor output terminal
in
the same format
as
the
video input signals, the monitor output terminal should
be of the same
type
as
the terminal used for
input,
Monitor output
terminals
o
Video connector
y
~PlI/ClI
•
000
Component video
Monitor
connectors
·0
•
10
S-Video connector
..
'N·na
eThe AVR-1609 supports foW video input formats:
HDMI, component video, S-video
and
video.
Because video signals are output from the
AVR-
1609's monitor output terminal
in
the same format
as
the video input signals, the monitor output
terminal should be of the same
type
as
the
terminal used for input.
e
The
component video connectors may
be
indicated differently
on
your monitor.
For
details,
see the monitor's operating instructions.
eTo
play
the sound
by
AVR-1609,
make analog or
digital audio output connections to AVR-1609's
audio input connectors.
---~I>
~
HDMI connector
le;J
HDMI connector
[Flow of video signals inside the AVR-1609)
High picture
quality playback
Connecting the Monitor
Select the terminal to use
and
connect the device.
y
~....,;a
I
=
Ji
000
Component video
connectors
I
=
Jl
0
S-Video connector
I
=
J~
0
Video connector
Video input terminals
I
11
To Next Page
Loading...
Need help?
General
