ENGLISH
I
GDYNAMIC
VOLUME button (34)
*About Dynamic Volume
Audyssey Dynamic Volume™ solves the problem
of large variations
in
volume level between
television programs, commercials. and between
the soft and loud passages of movies.
Audyssey Dynamic
EOTM
is integrated into
Dynamic Volume so that
as
the playback volume
is
adjusted automatically. the perceived bass
response. tonal balance, surround impression.
and dialog clarity remain the same.
*About Dynamic
EO
Audyssey Dynamic
EO
solves the problem of
deteriorating sound quality
as
volume is decreased
by taking into account human perception and
room acoustics. Audyssey Dynamic
EO
works
in
tandem
with
Audyssey MultEO@ to provide well-
balanced sound for every listener at any volume
level.
GVIDEO
SELECT
button·····
(38)
f)
ZONE2 indicator
This indicator lights when the ZONE2 is turned
on.
(Off when the "SOURCE" is selected.)
oTuner reception mode indicators
These lightaccording to the reception conditions
when the input source is set to "TUNER".
-AUTO
This lights when
in
the auto tuning mode.
-STEREO
In
the FM mode. this lights when receiving
analog stereo broadcasts.
-TUNED
This lights when the broadcast
is
properly tuned
in.
~INPUT
mode indicators···
(37)
~
SIGNAL indicators
~Display
~
SPEAKERS indicators
(38)
eRemote control sensor······················
.. ··
(3)
fj
ZONE2/REC
SELECT
button·············· (43)
@9S0URCESELECT knob .
(37)
f/SOURCE
button···
(37)
~STATUS
button .
(36)
i>
DIMMER button .
(38)
€!>
RESTORER button· (35)
GBAND button
..
.
(38)
GSHIFT
button···············································
(39)
GPRESET CHANNEL buttons
(!
,)
.
..
(39)
.TUNING
buttons
(!
'I··
(38)
~
MUL
TEO button (33)
oSignal channel indicator
Lights when the preset channel is displayed at
e.
oInformation display
_Input
signal indicators
• Master volume indicator
This displays the volume level.
The Setup item number is displayed
in
System
Setup.
oZONE2/REC OUT source indicators
The indicator for the source selected for ZONE2/
REC
OUT lights.
o
REC
SELECT indicator
Lights while selecting the
REC
SELECT
mode.
(Off when the "SOURCE"
is
selected.)
seLECT
I
ENTER
- The control functions
in
the same way
as
the
cursor
<J
button when turned counterclockwise.
as
the cursor
~
button when turned clockwise.
- The control functions
in
the same way
as
the
ENTER
button when pressed the knob.
"Cursor
buttons (Ll.
'VI
(21)
~
MASTER VOLUME control knob··
(38)
~
Dynamic Volume indicator· (34)
__
MultEO indicator (33)
~
Master volume indicator
~
SURROUND
BACK
indicator
..
SELECT/ENTER knob
11
- The
SELECT/ENTER
knob
on
the main unit
operates
in
the same way
as
the cursor
<J
and
~
buttons
on
the remote control unit.
·········(37)
····················(37)
······(37,
44)
······(38)
·············(37)
········(38.44)
···········(50)
···(44)
For
buttons not explained here. see the page indicated
in
parentheses (
).
Part Names and Functions
oPower operation button
(ON/STANDBY) .
oPower indicator
_ Power switch
(_ON
.OFF)
•
Headphone
jack (PHONES)···
oINPUT MODE button .
o
SPEAKERS
button··· .
f)ZONE2
ON/OFF
button····
00UICK
SELECT buttons
OV.
AUX INPUTconneetors
Remove the cap covering the connectors when
you want to use them.
==
0000
0
0
0000
000
~
U
_______
O#_---.._
__..J
c:=
C!)SETUP MIC jack . (18)
..
SYSTEM SETUP button (21)
':&SURR. MODE /
SURR.
PARA
button (29,31)
4
To Next Page
Loading...
Need help?
General
