Denon AVR-1611 Service Manual

27
Surround mode
Surround Parameter
Tone
z15
Audyssey Settingsz20
RESTORER
z19
AFDM
z12
S.Back
Front Height
z13
Height Gain Subwoofer
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama Dimension Center Width Center Image MultEQ
®
Dynamic EQ
®
z17
Dynamic
Volume™
z18
DIRECT (2 channel)
S
z3
DIRECT (Multi-channel) STEREO
SSSSS
MULTI CH IN
SSSS
z14
SSSS
DOLBY PRO LOGIC gz SS SSSSS DOLBY PRO LOGIC gx S SSS SSSSS
DOLBY PRO LOGIC g SS SSS SSSSS
DTS NEO:6
S SSSSSS
DOLBY DIGITAL
SSSS
z14
SSSS
DOLBY DIGITAL Plus
SSSS
z14
SSSS
DOLBY TrueHD
SSSS
z14
SSSS
DTS SURROUND
SSSS
z14
SSSS
DTS 96/24
SSSS
z14
SSSS
DTS-HD
SSSS
z14
SSSS
DTS Express
SSSS
z14
SSSS
MULTI CH STEREO
SS SSSSS
ROCK ARENA
SS S
z16
SSSS
JAZZ CLUB
SS SSSSS
MONO MOVIE
SS SSSSS
VIDEO GAME
SS SSSSS
MATRIX
SS SSSSS
VIRTUAL
SSSSS
z3
Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output from the subwoofer.
z12 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played. z13 If “Speaker Config.” – “Front Height” is set to “None”, this item cannot be selected. z14 This item can be selected when “Surround Parameter” – “Front Height” is set to “ON”. z15 This item cannot be set when “Dynamic EQ” is set to “ON”. z16 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default) z17 This item cannot be set when “MultEQ” is set to “OFF” or “Manual”. z18 This item cannot be set when “Dynamic EQ” is set to “OFF”. z19 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz. z20 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.

Denon AVR-1611 Specifications

General

Impedance	6 Ω
Frequency range	10 - 100000 Hz
Audio output channels	5.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.7 %
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Radio Data System (RDS)	Yes
Audio system	Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, DTS-HD, DTS 96/24
Output power	110 W
Dimensions (WxDxH)	434 x 381 x 171 mm
Power requirements	AC 230, 50 Hz
HDMI ports quantity	5
I/O ports	1 x Component 3 x Composite (Video) 5 x Analogue Audio (Tuner included) 1 x Composite Monitor 1 x Microphone Port 1 x Dock Control Port 1 x FM Tuner Antenna 1 x AM Tuner Antenna
Connectivity technology	Wired
Digital audio optical in	1
Product color	Black
Power consumption (standby)	0.1 W
Power consumption (typical)	360 W

Weight and Dimensions

Weight	9200 g