65
Error
Code
Details of Error code Display Coping strategies
39
Connection to DPMS timed out
when Main CPU was rewritten.
C o n n e c t i o n F a i l 3 9
Check the network connection.
Carry out the update in an environment
that has little network load.
3A
Error (NG) message was received
when rmware was downloaded or
Main CPU was rewritten.
D o w n l o a d f a i l 3 A
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
3B
Error (line congestion) message
received when downloading rmware
when Main CPU was rewritten.
D o w n l o a d f a i l 3 B
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
3C
Error (connection failure) message
received when downloading rmware
when Main CPU was rewritten.
D o w n l o a d f a i l 3 C
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
3D
Failure to acquire (Boot Loader Mode)
IP address before rewriting DM860A
(AutoIP).
C o n n e c t i o n F a i l 3 D
Check the network connection.
Carry out the update in an environment
that has little network load.
3E
Failure to acquire (Boot Loader Mode)
IP address before rewriting DM860A
(when timed out).
C o n n e c t i o n F a i l 3 E
Check the network connection.
Carry out the update in an environment
that has little network load.
50
Log-in to DPMS failed when rmware
such as DSP and PLD was rewritten.
L o g i n f a i l e d 5 0
Carry out the update in an environment
that has little network load.
51
Line, etc., is busy when the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
S e r v e r i s b u s y 5 1
Carry out the update in an environment
that has little network load.
52
Connection to DPMS failed when
rmware such as DSP and PLD was
rewritten.
C o n n e c t i o n F a i l 5 2
Check the network connection.
Carry out the update in an environment
that has little network load.
54
Error message received regarding
rmware data after the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
U p d a t i n g f a i l 5 4
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
55
When rmware such as DSP and
PLD was rewritten, request was made
for rmware data after the log-in to
DPMS, but it timed out.
U p d a t i n g f a i l 5 5
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
56
Downloading rmware failed after the
log-in to DPMS when rmware such
as DSP and PLD was rewritten.
D o w n l o a d f a i l 5 6
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
57
Firmware download error received
(line congestion) after the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
D o w n l o a d f a i l 5 7
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
58
Firmware download error received
(connection failure) after the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
D o w n l o a d f a i l 5 8
Turn off and on the power.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
5A
NACK was received when "C"
command sent to DSP, PLD etc.
C o n n e c t i o n F a i l 5 A
Turn off and on the power.
Updating starts automatically.
5B
NACK was received when "L"
command sent to DSP, PLD etc.
U p d a t i n g f a i l 5 B
Turn off and on the power.
Updating starts automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
