Denon AVR-4800 User Manual

13
Connections when using surround back speakers
R L
OUT
OUT
OUT
OUT
OUT
OUT
PRE OUT
6 16
6 16
8 16
PHONO
FRONT
CENTER
EFECT
/ SB
SURROUND
SIGNAL
GND
CD
DVD
VDP
TV
/
DBS
V.AUX
VCR
-
1
VCR
-
2
MD
/
TAPE-1
TAPE-2
MONITOR
SOURCE
MULTI
OUT-1
MONITOR
OUT-2
DVD
VDP
TV
/
DBS
V.AUX
VCR
-
1
VCR
-
2
VCR
-
1
VCR
-
2
VCR
-
1
VCR
-
2
MD
/
TAPE-1
TAPE-2
6CH EXT. IN
FR
SW
SR
ER
FL
C
SL
EL
8CH EXT. IN AUDIO VIDEO S-VIDEO DIGITAL
SUB
WOOFER
R L
R L
R L
YC
B
DVD TV/DBS
COMPONENT VIDEO
SPEAKER SYSTEMS
OPTICAL
COAXIAL
OPTICAL-5
123
123
4
SWITCHED TOTAL 120W(1A.) MAX.
AC 120V 60Hz
AC OUTLETS
AC IN
FRONT
/ EFECT, SB
CENTER
R L
R L
SURROUND
SURROUND
POWER
AMP
REMOTE CONTROL
FRONT / EFECT, SB / CENTER:
SURROUND
/ A OR B :
A+B :
MONITOR
ROOM TO ROOM
REMOTE
CONTROL
CR YCB CR YCB CR
B
A
IN
IN IN
IN
IN
IN
IN
IN
LOOP
ANT.
AM
FM
COAX.
75
ANTENNA TERMINALS
SB-R
SB/
SB-L
SB-R SB / SB-L
(
L
) (
L
) (
R
) (
R
)
(
L
) (
R
)
R
L
B
R
Power amplifier (0ption)
INPUT
L
LR
R
L
(1) When using a power amplifier for the surround back channel
Connect the PRE OUT SBL and SBR jacks to the power amplifier's input jacks.
Connection jack for
subwoofer with built-in
amplifier (super woofer),
etc.
SURROUND SPEAKER
SYSTEMS
CENTER SPEAKER SYSTEM
FRONT SPEAKER SYSTEMS
SURROUND BACK
SPEAKER SYSTEMS
The power amplifier's SP outputs are used for the surround back channels (EFFECT channels for 8ch EXT IN).
IN
NOTE:
When using only one surround back speaker, connect it to the surround back left channel.

Denon AVR-4800 Specifications

Power Amplifier

stereo rated output	125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
surround rated output	125 W x 5 ch (8 Ω/ohms, 1 kHz with 0.7% T.H.D.)
dynamic power	170 W x 2 ch (8 Ω/ohms), 270 W x 2 ch (4 Ω/ohms), 350 W x 2 ch (2 Ω/ohms)

Analog Audio

input sensitivity / input impedance	200 mV / 47 kΩ/kohms
frequency response	10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N ratio	105 dB (DIRECT mode)

Digital Audio

D/A output rated output	2 V (at 0 dB playback)
total harmonic distortion	0.005% (1 kHz, at 0 dB)
S/N ratio	105 dB

Phono Equalizer

input sensitivity	2.5 mV
RIAA deviation	±1 dB (20 Hz to 20 kHz)
signal-to-noise ratio	74 dB (A weighting, with 5 mV input)

Video

standard video jacks input/output level and impedance	1 Vp-p, 75 Ω/ohms
S-video jacks input/output level and impedance	Y signal — 1 Vp-p, 75 Ω/ohms; C signal — 0.286 Vp-p, 75 Ω/ohms
color component video terminal input/output level and impedance	Y signal — 1 Vp-p, 75 Ω/ohms; Cb signal — 0.7 Vp-p, 75 Ω/ohms; Cr signal — 0.7Vp-p, 75 Ω/ohms

Tuner

receiving range	87.5 MHz ~ 107.9 MHz, 520 kHz ~ 1710 kHz
usable sensitivity	1.0 µV (11.2 dBf), 18 µV
signal to noise ratio (IHF-A)	MONO 80 dB, STEREO 75 dB

General

power supply	AC 120 V, 60 Hz
power consumption	10.9 A
maximum external dimensions	434 (W) x 181 (H) x 494 (D) mm (17-3/32” x 7-1/8” x 19-29/64”)

Remote Control Unit

batteries	R6P/AA Type (two batteries)
external dimensions	70 (W) x 215 (H) x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”)
weight	200 g (Approx. 7 oz) (including batteries)