EasyManuals Logo

Denon AVR-4800 User Manual

Denon AVR-4800
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
56
Surround parameters e
EFFECT:
This parameter turns the effect signals with multi surround mode speaker effects on and off in the WIDE SCREEN mode. When this parameter
is turned off, the SBL and SBR channel signals are equivalent to the SL and SR channels, respectively.
LEVEL:
This parameter sets the strength of the effect signals in the WIDE SCREEN mode. It can be set in 15 steps, from “1” to “15”. Set this to a
low level if the positioning or phase of the surround signals sounds unnatural.
6.1 / 7.1 SURROUND:
Set this to “ON” when using surround back speakers.
Set this to “OFF” when not using surround back speakers.
This operation can be performed directly using the buttons on the main unit’s panel.
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound
field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 30 ms.
TONE CONTROL:
This can be set individually for the separate surround modes other than Direct and Home THX Cinema.
2 Surround modes and parameters
Signals and adjustability in the different modes
Channel output Parameter (default values are shown in parentheses)
When playing Dolby Digital
and DTS signals
SURROUND
EX
D.COMP.
E
E
E
E
C
E
C
E
C
E
E
E
E
E
E
E
E
C (OFF)
C (OFF)
E
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
(30msec)
DELAY
TIME
E
E
E
E
E
E
E
E
E
E
E
C (10)
C (10)
C (10)
C (10)
C (10)
E
EFFECT
LEVEL
E
E
E
E
E
E
E
E
E
E
E
C
(Medium)
C
(Medium)
C
(Medium)
C
(Medium)
C
(Medium)
E
ROOM
SIZE
E
E
E
C (10)
E
E
E
E
E
E
E
E
E
E
E
E
E
LEVEL
E
E
E
C (ON)
E
E
E
E
E
E
E
E
E
E
E
E
E
EFFECT
E
E
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
E
E
E
E
E
E
CINEMA
EQ.
E
C (0dB)
C (0dB)
C (0dB)
E
C (0dB)
E
C (0dB)
E
C (0dB)
C (0dB)
C (note 1)
C (note 2)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
TONE
CONTROL
E
E
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
EFFECT
L/R
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SUB-
WOOFER
E
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SURROUND
BACK
E
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SURROUND
L/R
E
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
CENTER
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
FRONT
L/R
Mode
DIRECT
STEREO
6CH/8CH EXTERNAL INPUT
WIDE SCREEN
DOLBY PRO LOGIC
(THX CINEMA ON)
(THX CINEMA OFF)
DOLBY DIGITAL AC-3
(THX CINEMA ON)
(THX CINEMA OFF)
DTS SURROUND
(THX CINEMA ON)
(THX CINEMA OFF)
5CH/7CH STEREO
SUPER STADIUM
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
MONO MOVIE
MATRIX
C : Signal/adjustable
(Note 1) BASS: +6dB, TREBLE: 0dB
(Note 2) BASS: +8dB, TREBLE: +4dB
B : Turned on or off by speaker configuration setting
E : No signal/not adjustable
6.1/7.1
SURROUND
E
E
E
C
E
C
E
C
E
C
C
C
C
C
C
C
C

Other manuals for Denon AVR-4800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-4800 and is the answer not in the manual?

Denon AVR-4800 Specifications

Power Amplifier IconPower Amplifier
stereo rated output125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
surround rated output125 W x 5 ch (8 Ω/ohms, 1 kHz with 0.7% T.H.D.)
dynamic power170 W x 2 ch (8 Ω/ohms), 270 W x 2 ch (4 Ω/ohms), 350 W x 2 ch (2 Ω/ohms)
Analog Audio IconAnalog Audio
input sensitivity / input impedance200 mV / 47 kΩ/kohms
frequency response10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N ratio105 dB (DIRECT mode)
Digital Audio IconDigital Audio
D/A output rated output2 V (at 0 dB playback)
total harmonic distortion0.005% (1 kHz, at 0 dB)
S/N ratio105 dB
Phono Equalizer IconPhono Equalizer
input sensitivity2.5 mV
RIAA deviation±1 dB (20 Hz to 20 kHz)
signal-to-noise ratio74 dB (A weighting, with 5 mV input)
Video IconVideo
standard video jacks input/output level and impedance1 Vp-p, 75 Ω/ohms
S-video jacks input/output level and impedanceY signal — 1 Vp-p, 75 Ω/ohms; C signal — 0.286 Vp-p, 75 Ω/ohms
color component video terminal input/output level and impedanceY signal — 1 Vp-p, 75 Ω/ohms; Cb signal — 0.7 Vp-p, 75 Ω/ohms; Cr signal — 0.7Vp-p, 75 Ω/ohms
Tuner IconTuner
receiving range87.5 MHz ~ 107.9 MHz, 520 kHz ~ 1710 kHz
usable sensitivity1.0 µV (11.2 dBf), 18 µV
signal to noise ratio (IHF-A)MONO 80 dB, STEREO 75 dB
General IconGeneral
power supplyAC 120 V, 60 Hz
power consumption10.9 A
maximum external dimensions434 (W) x 181 (H) x 494 (D) mm (17-3/32” x 7-1/8” x 19-29/64”)
Remote Control Unit IconRemote Control Unit
batteriesR6P/AA Type (two batteries)
external dimensions70 (W) x 215 (H) x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”)
weight200 g (Approx. 7 oz) (including batteries)

Related product manuals