l
System setup items and default values (set upon shtpment from the factory1
-
i]
-
D
-
0
-
0
-
3
-
3
-
4
-
D
-
0
ii
-
D
a
-
P
-
9
-
$
-
System setup
I
Default settmgs
I
Speaker
Configuratior
Input the combmation of speakers 111 your system and their
correspondmy s,zes (Small for regular speakers. Latyr for full-ale,
Front Sp.
Center sp Sub Woofer Surround Sp. Surround Back Sp
full-range) to automatically set the composmon of the slgnrrls output
from the speakers and the frequency response
St7Xlll Small Yes
S”Xll Small, 2spkrs
Use this function when using mulbple surround speaker ~~~~~~~~~
“OLW,
01s
nix
~V;ilJE SClV/Ci-I
.gsp
Ib%L-i (11
combtnations for more Ideal surround sound. Once il~e
-
-
r;,fiOe
THX 6,
SCRiE’I SFSEO
Slii”~-,Oh
DlHECT
combmatlons of surround speakers to be “serf for the
SURROUND
different surround modes are preset, the surround
speakers are selected automatically accordmg to the %rro~nd
surround mode.
51>8z3i(ll
A
A A A A
Al- -
(Surround
Speaker
SettIngI
hSS”W
Frequency
Set the irequency (Hz1 below which the bass sound of the “ar,“u~
speakers is to be output from the subwoofer.
FIXED -THX-
-.-
e
Suhwoofer mod
This selects the subwoofer speaker for playmy deep bass signals ) LFE -THX-
Delay Time
This parameter IS for “ptrmlzrng the tlmlng with which the audio
Front L & R Center Sub Woofer Surr”“nd L & R SBL & SBR
stgndls are produced lrom the speakers and subwoofer according lo
the 11stenrng positron.
12.0 II (3.60 rn) 12.0 II (3 60 I‘(I) 12 0 ft (3 60 m) 10.0 ft (3 00 ml 10 0 II 13.00 mi
This adjusts the volume of the signals output from the speakers and
Front L
Front R
Center
S”rlo”nd Sumund S”W”“d Surround
subwoofer for the different channels m order to obtain optmwrn
R aaar i aacl, R
Subwoofer
effects.
0.0 dB
0.0 dB
OOdB
OOdB
0.0 dB
OOdB
0.0 dB
0.0 dB _
Channel
Level
Boundary Gam When “s,ng a THX Ultra2 compat~bie subwoofer.
compensation set the subwoofer’s frequency response.
THX Ultra2 Subwoofer = NO
THX Audio
Setup
Surround Back When using two surround back speakers, set
Spezxe: Position the distance of the tm’” speakers
The Distance Between SBUSBR = 0 ft to 1 ft (0 rm to 0.3 ml
This parameter 1s for detecung the max~mun~ level of the low b&s
signals output from the subwoofer channel I” order to protect the
subwoofer from damage and prevent unpleasant distorted sounds
from being produced.
Peak Lamlter = OFF
Subwoofer
Peak Limit
LeV
Diyital In
Assignment
V!deo Input
Mode
Set the input stgnal to be output from the momtor output terminal.
AUTO
Audio Delay
Adjust the time delay of the wdeo and dudio sbgnals.
Mutt, Zone1
This sets the output level for the multi-LO”~ 1
vol. Level
output
lacks.
Power AMP Sel thrs 1” watch the surround back channel’s
Assignment power amplifier for use for multi-zone 2.
Audi” Delay = 0 ms
Vamble
Surround Back
Multi Zone
Control
4uto SJrround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
Ext. In Setup
Set the Ext.ln terrnmal playback method
I
MODE = DSP. S.Back = NOT USED, SW Level = +15 dB, INPUT Vol = 0 dB
Digital Multi
Ch In
on Screen
Display
Drgrtal multichannel input setting.
This sets whether or nor to display the “n-screen display that
appears on the monrtor xreen when the controls on the remote
control unit or main unit ere operated (from MONITOR 1 outputs
Only)
DENON Link = OFF, DIgItal Ext. In = OFF
On Screen Display = ON
1 Al-AS 1 87 5/89 l/98 l/107.9/90.1/90 l/90.1/90.1 MHz
FM stations are recwed automatally dnd stored I” the memory.
Bl -68 520/600/l 00011400/1500/1710 kHz/90.1/90.1 MHz
Cl -C8 90.1 MHz
Dl ,.D8 90.1 MHz
4uto Tuner
Presets
El -E8 90.1 MHz
Setup Lock
Set whether or not to lock the system setup settings so that they
cannot be changed
Setu(> Lock = OFF
17
To Next Page
Loading...
Need help?
General
