Denon AVR-X2400H

Video Flow V1-07
.
"V1-07"
Question 1
Does the monitor support HDCP ver. 2.2 ?
Try Limit mode (HDCP2.2)
Set "HDCP2.2:Limit"
Question 2
Has your issue been fixed?
Keep the Limit Mode
Please check
the Source Device
(Note 1)
Please check
the Monitor Device
(Note 3)
No
Yes
Yes No
Description "V1-07": HDCP2.2/Stream ID Type mismatch (ie. Stream ID = 1,
but Monitor's HDCP = V1.4).
Try *** :AVR operation
Question * :Question for user to answer
Note 1 : Source Device check item (For details (v p. 40))
Note 3 : Monitor Device check item (For details (v
p. 40))
Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting
26