Denon AVR-X2400H - Page 29

Description "V*-02": Miscommunication with Monitor at output terminal (4K60
output setting error).
Description "V*-03": Miscommunication with Monitor at output terminal (HPD
continuous assert error).
Description "V*-04": Miscommunication with Monitor at output terminal (Rx
Sense continuous assert error).
Description "V*-06": Copyright protection certification error with Monitor.(HDCP
Error).
Note 2 : AV Receiver check item (For details (v p. 40))
Note 3 : Monitor Device check item (For details (v p. 40))
Note 4 : Try Limit Mode (For details (v
p. 40))
Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting
29