Denon AVR-X3100W - Listening to Radio and Internet Radio

Error
Code
Details of Error code Display Coping strategies
13
Block Erase failed before rewriting
Main.
E r a s e f a i l 1 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
14
Block Write failed while rewriting
Main.
U p d a t i n g f a i l 1 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
15
Error in Verify after rewriting Main
(Check Sum Error).
U p d a t e C h e c k N G 1 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
16
Setup failure of the transfer
method of XModem.
U p d a t i n g f a i l 1 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
20
Unable to detect USB after SBL
Mode.
C o n n e c t i o n F a i l 2 0
Disconnect and connect the USB
memory.
21
No Firmware File in USB after SBL
Mode.
F i l e s N o t F o u n d 2 1
Disconnect and connect the USB
memory.
22
Firmware File in USB after SBL
Mode for unsupported Model
name/area.
N o t M a t c h F i r m 2 2
Check the supported Model name/area
for the Firmware File.
23
Failed to obtain entire Firmware
information after SBL Mode.
C o n n e c t i o n F a i l 2 3
Disconnect and connect the USB
memory.
24
Time Out while obtaining entire
Firmware information after SBL
Mode.
C o n n e c t i o n F a i l 2 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
25 Failed to transit to SBL Mode.
C o n n e c t i o n F a i l 2 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
26
Time Out in Download (writing to
SDRAM) for Firmware Download.
D o w n l o a d f a i l 2 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
27
Failed to write to EEPROM after
SBL Mode.
C o n n e c t i o n F a i l 2 7
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
36 Unable to detect USB.
C o n n e c t i o n F a i l 3 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
37 No Firmware File in USB.
F i l e s N o t F o u n d 3 7
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
74