Denon AVR-X3100W Service Manual

2.3. About the error code
See the following table for details on the error code, details of the error code, display and coping strategies when updating
the rmware from DPMS. (DPMS:Denon Product Management Server).
Error
Code
Details of Error code Display Coping strategies
01 Failed to log in to DPMS.
L o g i n f a i l e d 0 1
Initialize the unit and try updating
again.
Update in an environment where there
is a small network load.
02
Line etc. is congested when log-
ging in to DPMS.
S e r v e r i s b u s y 0 2
Update in an environment where there
is a small network load.
03 Connection to DPMS failed.
C o n n e c t i o n F a i l 0 3
Check the network connection. Update
in an environment where there is a
small network load.
04
Failed to obtain individual Firm-
ware information.
C o n n e c t i o n F a i l 0 4
Check the network connection. Update
in an environment where there is a
small network load.
05
Time Out while obtaining indi-
vidual Firmware information.
C o n n e c t i o n F a i l 0 5
Check the network connection. Update
in an environment where there is a
small network load.
06
Failed to obtain entire Firmware
information.
C o n n e c t i o n F a i l 0 6
Check the network connection. Update
in an environment where there is a
small network load.
07
Time Out while obtaining entire
Firmware information.
C o n n e c t i o n F a i l 0 7
Check the network connection. Update
in an environment where there is a
small network load.
08
Error notication received while
requesting Firmware Info.
C o n n e c t i o n F a i l 0 8
Check the network connection. Update
in an environment where there is a
small network load.
09
Time Out while obtaining Firm-
ware information.
C o n n e c t i o n F a i l 0 9
Check the network connection. Update
in an environment where there is a
small network load.
0A
Error(NG) notication received
while requesting Firmware Down-
load.
D o w n l o a d f a i l 0 A
Check the network connection. Update
in an environment where there is a
small network load.
0B
Error(ServerBusy) notication re-
ceived while requesting Firmware
Download.
D o w n l o a d f a i l 0 B
Check the network connection. Update
in an environment where there is a
small network load.
0C
Error(Connect failure) notication
received while requesting Firm-
ware Download.
D o w n l o a d f a i l 0 C
Check the network connection. Update
in an environment where there is a
small network load.
0D
Received value with invalid Pack-
age Version.
C o n n e c t i o n F a i l
0 D
Check the network connection. Update
in an environment where there is a
small network load.
0E
Connection to DPMS failed.
(Cannot get NTP)
C o n n e c t i o n F a i l 0 E
Check the network connection. Update
in an environment where there is a
small network load.
10
No Update Packet received from
CX870 (Time Out).
U p d a t i n g f a i l 1 0
Turn on the power again. Update will
start automatically.
11
Abnormal data in Update Packet
received from CX870 (CRCError).
U p d a t i n g f a i l 1 1
Turn on the power again. Update will
start automatically.
80

Denon AVR-X3100W Specifications

General

Receiver type	Surround
Speaker selector	A+B
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Remote control in	1
Composite video in	3
Multichannel audio input type	Terminals
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Supported radio bands	FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	10700 g