Denon AVR-X3100W - Page 84

Error
Code
Details of Error code Display Coping strategies
A1
IP Address acquisition failure
(Time Out).
C o n n e c t i o n F a i l A 1
Check the network connection. Update
in an environment where there is a
small network load.
A2
Login incorrect notication DPMS
connection.
L o g i n f a i l e d A 2
Check the network connection. Update
in an environment where there is a
small network load.
A3
Server congestion notication by
DPMS connection.
S e r v e r i s b u s y A 3
Check the network connection. Update
in an environment where there is a
small network load.
A4
Connection failure notication
DPMS connection.
C o n n e c t i o n F a i l A 4
Check the network connection. Update
in an environment where there is a
small network load.
A6
Error notication received while
requesting Firmware Info.
U p d a t i n g f a i l A 6
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
A7
Time Out while obtaining Firm-
ware information.
U p d a t i n g f a i l A 7
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
AE
Error(NG) notication received
while requesting Firmware Down-
load.
D o w n l o a d f a i l A E
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
AF
Error(ServerBusy) notication re-
ceived while requesting Firmware
Download.
D o w n l o a d f a i l A F
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B0
Error(Connect failure) notication
received while requesting Firm-
ware Download.
D o w n l o a d f a i l B 0
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B1
Error in Firmware Download (Time
Out).
D o w n l o a d f a i l B 1
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B2
Error notication received after
rewriting CX870 Firm.
D o w n l o a d f a i l B 2
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B3
Error in Firmware Update (Time
Out).
U p d a t i n g f a i l B 3
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B4
Failed to transit to Boot Loader
Mode.
U p d a t i n g f a i l B 4
Initialize the unit and try updating
again.
B5
Failed to transit to Application
Mode.
U p d a t i n g f a i l B 5
Initialize the unit and try updating
again.
84