Denon AVR-X3300W Service Manual

Error
Code
DPMS Update Error
Display
Details of Error code Remedies
24
Update Error**24
DPMS connection failure
notication after SBL.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
25
Update Error**25
Failed to transit to SBL Mode.
Unplug and reconnect the AC plug, and
try again.
26
Update Error**26
Error in Firmware Download
(Time Out).
Unplug and reconnect the AC plug, and
try again.
27
Update Error**27
Failed to write to EEPROM
after SBL Mode.
Unplug and reconnect the AC plug, and
try again.
36
Update Error**36
DPMS login incorrect notica-
tion.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
38
Update Error**38
DPMS connection failure
notication.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
39
Update Error**39
DPMS connection Time Out
Error.
Unplug and reconnect the AC plug, and
try again.
3A
Update Error**3A
Error(NG) notication received
while requesting Firmware
Download.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
3C
Update Error**3C
Error(Connect failure) notica-
tion received while request-
ing Firmware Download.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
3D
Update Error**3D
After SBL Mode IP Address
acquisition failure (AutoIP).
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
3E
Update Error**3E
After SBL Mode IP Address
acquisition failure (Time Out).
Unplug and reconnect the AC plug, and
try again.
3F
Update Error**3F
Failed to transit to SBL Mode.
Unplug and reconnect the AC plug, and
try again.
50
Update Error**50
DPMS login incorrect notica-
tion.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
52
Update Error**52
DPMS connection failure
notication.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Error
Code
DPMS Update Error
Display
Details of Error code Remedies
54
Update Error**54
Error notication received
while requesting the Firm-
ware Info.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
55
Update Error**55
Time Out while obtaining
Firmware information.
Unplug and reconnect the AC plug, and
try again.
56
Update Error**56
Error(NG) notication received
while requesting Firmware
Download.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
58
Update Error**58
Error(Connect failure) notica-
tion received while request-
ing Firmware Download.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
5A
Update Error**5A
Invalid Device ID in response
or no response from Sub for
the "C" command.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
5B
Update Error**5B
NACK received in response or
no response from Sub for the
"L" command.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
5C
Update Error**5C
No Update Packet received
from CY920 (Time Out).
Unplug and reconnect the AC plug, and
try again.
5D
Update Error**5D
Abnormal data in Update
Packet received from CY920
(CRC Error).
Unplug and reconnect the AC plug, and
try again.
5E
Update Error**5E
Abnormal data in Update
Packet received from CY920
(Packet No Error).
Unplug and reconnect the AC plug, and
try again.
5F
Update Error**5F
Setup failure of the XModem
transfer method.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
60
Update Error**60
NACK received in response or
no response from Sub for the
"P" command.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
61
Update Error**61
Mismatched Check Sum in
response or no response from
Sub for the "I" command.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
167
Caution in
servicing
Electrical Mechanical Repair Information Updating

Denon AVR-X3300W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	7.2
Pre-out connectivity	Yes
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Product color	Black
Audio decoders	DTS-HD, DTS-HD Master Audio, Dolby TrueHD
Multi-Zone quantity	2
Apple docking compatibility	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
HDMI in	8
Audio (L/R) in	5
Remote control in	1
Composite video in	3
Composite video out	0
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Audio formats supported	AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	10800 g