Denon AVR-X4000 User Manual

145
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 General
Setting items Description Page
Language Sets the language for display the menu on the TV screen.
193
ZONE2 Setup / ZONE3 Setup Makes settings for audio playback with multi-zone (ZONE2, ZONE3).
193
Bass Adjust bass tones.
193
Treble Adjust treble tones.
193
High Pass Filter Make settings for cutting the low range to reduce distortion in the bass.
193
Lch Level Adjust the left channel output level.
194
Rch Level Adjust the right channel output level.
194
Channel Set the signal output from multi-zone.
194
HDMI Audio (ZONE2 only) Selects the audio signal format for playing an HDMI source in ZONE2.
194
Volume Level Set the volume output level.
194
Volume Limit Make a setting for maximum volume.
194
Power On Volume Define the volume setting that is active when the power is turned on.
194
Mute Level Set the amount of attenuation when muting is on.
195
Zone Rename Change the display title of each zone to one you prefer.
195
Quick Select Names Change the “Quick Select” display title to one you prefer.
195
Trigger Out 1 / Trigger Out 2 Selects when to activate trigger out.
195
Auto Standby When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically
enters the standby mode. Before it enters the standby mode, “Auto Standby” is displayed on the display of this unit and the
menu screen.
196
Front Display Makes settings related to the display on this unit.
196

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g