Denon AVR-X4000 User Manual

146
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Setting items Description Page
Information Show information about receiver settings, input signals, etc.
197
Audio Shows information about audio input signals.
197
Video Shows information about video input signal and HDMI Monitor.
197
ZONE Shows information about each zone.
197
Firmware Displays system information.
197
Notifications Selects notification message preferences.
198
Usage Data Selects whether or not to send anonymous usage data to Denon.
198
Firmware Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.
199
Update Update the firmware of the receiver.
199
Notifications Displays a notification message on this unit’s menu screen when the latest firmware is released with “Update”.
199
Add New Feature Display new features that can be downloaded to this unit and perform an upgrade.
200
Setup Lock Protect settings from inadvertent changes.
201
2 Setup Assistant
Setting items Description Page
Begin Setup Perform basic installation/connections/settings from the beginning according to the guidance indicated on the TV screen.
C 7
Language Select Perform settings item by item according to the guidance indicated on the TV screen.
Speaker Setup
Speaker Calibration
Network Setup
Input Setup

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g