EasyManuals Logo

Denon AVR-X4700H User Manual

Denon AVR-X4700H
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #251 background imageLoading...
Page #251 background image
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings.
If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter
information about your home network (LAN) such as the gateway address and subnet mask, etc.
Information
Display network information.
Friendly Name / Connection / SSID / DHCP / IP Address /
MAC Address (Ethernet) / MAC Address (Wi-Fi) /
Wi-Fi signal strength
Connection
Choose whether to connect the home network to a wireless LAN or a
wired LAN.
When connecting to the network using wired LAN, select “Wired
(Ethernet)” after connecting a LAN cable.
When connecting to the network using wireless LAN, select “Wireless (Wi-
Fi)” and configure the “Wi-Fi Setup”. (v p. 252)
o
Connect Using
Select the method for connecting to the home network (LAN).
Wired (Ethernet): Use a LAN cable to connect to a network.
Wireless (Wi-Fi)
(Default):
Use the wireless LAN (Wi-Fi) function to
connect to a network.
Contents Connections Playback Settings Tips Appendix
251
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X4700H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4700H and is the answer not in the manual?

Denon AVR-X4700H Specifications

General IconGeneral
Channels9.2
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
4K/120Hz Pass-throughYes
8K/60Hz Pass-throughYes
Wi-FiYes
BluetoothYes
HEOS Multi-roomYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
Speaker Impedance4-16 ohms
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARC SupportYes
Auro-3DYes
Audyssey MultEQ XT32Yes
AirPlay 2Yes
Phono InputYes
Input Sensitivity/Impedance200mV/47k ohms
Analog Audio Inputs6
EthernetYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Power Output125W per channel (8 ohms, 20Hz-20kHz, THD: 0.05%, 2ch driven)
HDMI Inputs8
Dimensions17.1 x 15.3 x 6.6 inches
Zone OutputZone 2, Zone 3
Frequency Response10Hz-100kHz (+1, -3 dB, Direct Mode)
Total Harmonic Distortion0.05% (20Hz-20kHz, 8 ohms)
Signal-to-Noise Ratio102dB
Video Inputs/OutputsComponent (2 in / 1 out)
Digital Audio InputsOptical (2), Coaxial (2)
USB Port1 (Front)
Supported Video Formats4K, 8K

Related product manuals