EasyManuals Logo

Denon AVR-X4700H User Manual

Denon AVR-X4700H
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #263 background imageLoading...
Page #263 background image
Bluetooth Transmitter
Sets this unit's Bluetooth transmitter.
Set to use Bluetooth headphones to listen to audio playing in the MAIN
ZONE.
o
Transmitter
Enables or disables the Bluetooth transmitter.
Off
(Default):
Disables the Bluetooth transmitter
feature.
On: Enables the Bluetooth transmitter feature.
o
Output Mode
Selects the audio output method.
Bluetooth + Speakers
(Default):
Audio is output to Bluetooth headphones
and main zone speakers.
Bluetooth Only:
Audio is output to Bluetooth headphones
only.
o
Connected device
Displays the Bluetooth device connected to this unit.
o
Device List
Available devices are displayed in the list once you start pairing mode
on the Bluetooth headphones you want to connect. Select your
Bluetooth headphones from the list to pair them.
This unit can only pair with one Bluetooth headphone at a time.
However, up to 8 Bluetooth headphones can be registered. Switch
between registered devices from Device List in the “Bluetooth
Transmitter” setup menu.
To remove a saved Bluetooth device from the list, use the ui buttons
to select it, then press the OPTION button and select “Forget This
Device”.
0
“Output Mode” can also be set from “Bluetooth Transmitter” in the option menu.
0
A2DP profile-compatible Bluetooth speakers can be connected following the same
steps used to connect Bluetooth headphones.
NOTE
0
Bluetooth transmitter and Bluetooth receiver function cannot be used at the same
time. Settings in this menu are not available when listening to music on a Bluetooth
device in any zone.
0
Even when “Transmitter” is set to “On”, press Bluetooth on the remote control to
select the “Bluetooth” source and enable the Bluetooth receiver function.
To listen to music stored on Bluetooth devices such as smartphones on this unit,
press Bluetooth on the remote control to switch the input source to Bluetooth, then
reconnect the Bluetooth device.
0
Menu settings for Bluetooth Transmitter are not available when this unit is grouped
within the HEOS App.
Contents Connections Playback Settings Tips Appendix
263
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X4700H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4700H and is the answer not in the manual?

Denon AVR-X4700H Specifications

General IconGeneral
Channels9.2
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
4K/120Hz Pass-throughYes
8K/60Hz Pass-throughYes
Wi-FiYes
BluetoothYes
HEOS Multi-roomYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
Speaker Impedance4-16 ohms
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARC SupportYes
Auro-3DYes
Audyssey MultEQ XT32Yes
AirPlay 2Yes
Phono InputYes
Input Sensitivity/Impedance200mV/47k ohms
Analog Audio Inputs6
EthernetYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Power Output125W per channel (8 ohms, 20Hz-20kHz, THD: 0.05%, 2ch driven)
HDMI Inputs8
Dimensions17.1 x 15.3 x 6.6 inches
Zone OutputZone 2, Zone 3
Frequency Response10Hz-100kHz (+1, -3 dB, Direct Mode)
Total Harmonic Distortion0.05% (20Hz-20kHz, 8 ohms)
Signal-to-Noise Ratio102dB
Video Inputs/OutputsComponent (2 in / 1 out)
Digital Audio InputsOptical (2), Coaxial (2)
USB Port1 (Front)
Supported Video Formats4K, 8K

Related product manuals