Denon AVR-X5200W Service Manual

3.9. TUNER STEP mode (E2/E3 only)
3.9.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3.9.2. Starting up
Hold down buttons "STATUS" and "ZONE3 SOURCE" at the same time and press the power button to turn on the power.
Select the "5. TUNER FRQ SET" using the button "CURSOR
f
", and press the button "ENTER" to commit the selection.
3.9.3. Displays
Start this unit in TUNER STEP mode, select using button "CURSOR
0
/
1
" and enter using button "ENTER".
The following information is displayed in the following order.
(1) AM9kHz/FM50kHz selected
FLD
L1
* T U N E R F R Q S e t
L2
< A M 9 / F M 5 0 >
"
CURSOR
0
" "CURSOR
1
"
(2) AM10kHz/FM200kHz selected
FLD L2
< A M 1 0 / F M 2 0 0 >
"ENTER"
(3) Press the power button to turn off the power.
(4) Press the power button to turn on the power.
73

Denon AVR-X5200W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Pre-out connectivity	Yes
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	205 W
Power output per channel (20-20KHz@8 Ohm)	140 W
HDMI in	8
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired & Wireless
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
Product color	Silver
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	730 W

Weight and Dimensions

Depth	393 mm
Width	434 mm
Height	167 mm
Weight	14200 g