Denon DCD-3560 - Clearing the Program; Correcting Programs; Finding Sections Within a Track; Suojakoteloa Ei Saa Avata. Laite

(3) Correcting Programs
"PlAY
PfU:>'V<M
[OJ [OJ
IQ IQ
1lPAl&
.... DIRECT
[OJ [OJ
IQ IQ
_SHY
INDEX CALL
[OJ
IQ IQ
• DlSF\AY TI'i'SEAIO< ALL -REPEAT- I
Remote control Unit [OJ [OJ C Ie
(CLEAR)~
CLEAR TIME .,10 sPAC!' AUTO WT
~[OJIQ~
• I ---'="'---==---'="-==- III
1 Press the ( II PAUSE) button.
2 Press the number button(s) for the desired track.
• To
start playback, press the ( ~ PLAY) or ( II PAUSE) button.
(2) With Program Search
• .Press
the ( II PAUSE) button after the program search operation is
completed. The set will pause at the beginning of the first programmed
track.
o Finding Sections Within a Track ·1 Index Search
•
To correct a programmed track, press the CLEAR button, then program
the correct track. The last programmed track will be cleared and the
correct track will take its place.
•
To erase a programmed track, recall it with the CALL button, then press
the CLEAR button and the STOP button, in that order. The track will be
erased.
(4)
Playing the Programmed Tracks
• Press
the ( ~ PLAY) button to play the tracks in the programmed order.
(5) Clearing the Program
• The entire program is cleared when the PROG/DIRECT button is
pressed again. The program is also cleared when the ( oi!i: OPENI
CLOSE) button is pressed.
• If
the PROGIDIRECT button is pressed during programmed play, the
program is cleared and playback continues normally through to the last
track on the disc.
•
With this function, you can find and play from the beginning of sections
within the track marked by index numbers.
........ - - ~8
=;~ __ ~_oo 0 cLiIiCOOnOOCo 0 (!I)~'
I':XI ~ -- --~-- --
(Number buttons)
(1) u._u appears on the TRACK NO. display when the INDEX button is
pressed.
(2' Input the track number using the number buttons.
Next, u __ u appears on the INDEX display. Input the desired index
number, and playback will start from that index number.
For example, to start from index 2 on track number 3, press INDEX, 3,
then 2.
o Pausing playback at any point !PauseI
o Searching and Pausing at the Beginning
of the Track ! Pause!
Remote control unit
(ALL-REPEAT)
~ Remote control unit
=T~ (REPEAT-1)
II
"PlAY
,-
-
PfU1W,l
[OJ [OJ
C
1lPAl&
.... .... DIRECT
[OJ [OJ
C ~
II
_STCI' INDEX CALL
[OJ IbJ)
Cl
DlSF\AY TI'i'SEAIO< ALL -REPEAT· ,
[OJ IbJ)
c
--='
CLEAR
TIME AUTO SPACE /'i
1
[OJ
Ie C ~
..
"PlAY
, .... .....
PRX;RAM
~
IbJ
[bJ
C
IIPAUSI:
....
.... DIRECT
[OJ
[OJ
~
[OJ
_ST()l INDEX
CALL
~
~
[OJ
OSi'u\Y TIMESEAIO< ALL -REPEAT·'
[OJ
[OJ
~
CLEAR
TIME .,10 sPAC!' AUTO WT
[OJ IbJ]
IbJ]
IbdJ
II
o Repeating playback of all tracks 1 Repeat All I
9
Indexes
• Indexes are numbers which are assigned to sections within a
track. Check
the disc's explanatory notes for the index numbers.
• If you input an index number not on the disc, playback will start
from the last index number on the track.
4D Repeating a Single Track , !1.track Repeat1
• Press this button if you want to hear a track repeatedly.
(1) Press the repeat all button (ALL).
(2) Press the play button ( ~ PLAY).
•
When pressing the repeat all tracks button (ALL), I ALL Iis displayed.
• Steps
0) and (2) above may be reversed .
• To cancel repeat playback
of all tracks, press the repeat all button (ALL)
once
more.
• Pressing the repeat all button (ALL) during programmed playback,
playback
of the tracks entered into the memory will be repeated.
•
When the 1-track repeat button (REPEAT-1) is pressed during playback,
only the number of the track currently playing will remain lit on the
calendar, as long as the track number is not over 20, and that track will
be repeated.
•
If the track number is 21 or over, the 1-track repeat function will work,
but nothing will be lit on the calendar.
In this case, the set pauses at the beginning of the track found with the
direct search operation.
With Direct Search
I~~o _ 11 ~-~-';
LE t:::::::J': '5'
i?.rg;,;:,:- •.•• ~ ~ 0_._0 CCCCCCD.·. Li.D_· 00 O·~ ;:P
~=¥~-~- ~~~~~~_._ .. ~ 0-····
., ( II PAUSE)
NOTES
•
If programming is done in the play or pause mode, the track
currently. playing is programmed at the first position. Other
tracks can be added to the program, but the number of
programmed tracks and the playing time will not be displayed.
• Direct search is not possible during programmed play. If the
number buttons are pressed, that track is added to the end ofthe
program.
• Programming is possible with the disc holder open. Track
numbers greater than the number of tracks recorded on the disc
can be programmed, but will be automatically cleared before
playback begins.
• Playback can
be temporarily halted and then continued from the same
point in the track.
1. Press the pause button ( II PAUSE) during playback.
2. To continue playback, press the play button ( ~ PLAY) or the pause
button ( II PAUSE) once more.
•
(1)