129
2D Code Handy Terminal
[2] Uploading the system message file
1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
UPLOAD] and then press the ENT key.
The screen displays as shown on the right indicating that the BHT is waiting
for the system message file to be uploaded.
2. While the upload is in progress, the screen displays as shown on the right
indicating the file name and the number of sent records/the total number of
records.
3.
Upon completion of uploading, the BHT displays the screen shown on the
PARAMETER menu.
he beeper sounds three times if an error occurs during uploading, and an
r Messages” - “7.2 System Mode Errors” and
- Point - When uploading the system message file, the BHT creates a
tically be deleted afte
Press the C key to abort the upload and return to the SYSTEM MESSAG
E
menu.
right and beeps once.
Press the C key to return to the SYSTEM
T
error screen displays.
Refer to “Chapter 7 Erro
remedy the error.
temporary file
named “_B60MSG.FN3” in the user area. An
error will therefore occur if there is insufficient space in the
user area to create the temporary file.
The created temporary file will automa
uploading is complete.
To Next Page
Loading...
