87
2D Code Handy Terminal
4.5.6
BHT Operation Test (TEST Menu)
Use the following procedure to perform a BHT operation test.
1. Select “5: TEST” at the SYSTEM MENU and then press the ENT key.
The TEST menu screen displays as shown on the right.
“1: QRCODE”:
Selects the Q
Rcode reading test.
“2: MEMORY”:
Selects the RAM read/write test.
“3: BEEPER”:
Selects the beeper scale test.
“4: AGING”:
Selects the aging test.
“5: LCD”:
Selects the LCD and indicator indicator LED tests.
“6: FILE”:
Selects the file checksum test.
“7: COMMUNICATION”:
Selects the communication test.
“8: KEY & VIBRAT
ION”:
Selects the key entry, beeper and vibrator tests.
“9: PING”:
Selects the PING test.
Refer to the following section for details of the above items.
Press the C key to return to the SYSTEM MENU.
Contact your nearest dealer If an error occurs during any of the above tests.
- Point -
To Next Page
Loading...
