88
BHT-604Q
[1] QR code reading test
Use the following procedure to perform a QR code reading test.
1. Select “1: QRCODE” at the TEST menu and then press the ENT key.
The screen displays as shown on the right.
2. Read a barcode or 2D code with the BHT.
Upon completion of barcode or 2D code reading, the BHT beeps once, and
the indicator LED turns blue.
3. The read 2D code or barcode type, lead digits, total number of digits,
and code data display on the screen. Ensure that the code data and
screen display match.
Press the C key to return to the TEST menu.
Code Type and Corresponding Characters Displayed on the Screen
Code type ID
characters
QR Code Q
QR Code (Codes concatenated with unedited
modes)
S
PDF417 Y
Maxicode X
Data matrix Z
EAN-13 (JAN-13)UPC-A A
EAN-13（JAN-13), UPC-A COMPOSITE A
EAN-8（JAN-8） B
EAN-8（JAN-8）COMPOSITE B
UPC-E C
UPC-E COMPOSITE C
Interleaved 2of5 (ITF) * I
Codabar（NW-7） N
Code 39 M
Code 93 L
Code 128 K
GS1-128 (EAN-128) W
GS1-128 (EAN-128) COMPOSITE W
Total digits
Lead digits
Code type
Code data
RSS (GS1 DataBar) R
RSS (GS1 Da
taBar) COMPOSITE R
*with ITF, a code with 4 or more digits is read.
To Next Page
Loading...
