Denso BHT-604Q - System Mode Basic Operation

46
BHT-604Q
4.4.2 System Mode Basic Operation
Menu selection and Display
Use the following procedure to select and display each menu.
1. Press the numerical key corresponding to
the menu to be selected.
Alternatively, press the cursor keys ([▲]
[▼]) to select the menu.
The selected menu item will be highlighted.
“EXECUTE PROGRAM” will be highlighted
when System Mode is started up.
2. Press the ENT key.
The selected item is set and the next screen
displays.
Press the C key to return to the previous
screen.
The selected item will be highlighted when
returning to the previous screen.
3. Repeat the above operation to display the
target menu.
 Operation example
ENT key
ENT key
ENT key
C key
C key
Select [3:COM PORT]
with the [3] or [▲]/[▼]
keys.
Select [4: SET SYSTEM]
with the [4] o
r
[▲]/[▼]
keys.
Select
[5:COMMUNICATION]
with the [5] o
r
[▲]/[▼]
keys.
C key