32
BHT-604Q
3.5.1 Connector Communication
Connect the host computer and BHT with a dedicated interface cable (Option, Type:
CBBHT-RS1000/3-9-02) and perform data communication.
The BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0 Transfer Utility (Option) software is
required.
Dedicated interface
cable
Requests
Do not use a cable other than the dedicated interface ca
ble.
Avoid disconnecting and reconnecting the cable more than once a day. Disconnecting and
reconnecting the cable too frequently will shorten the lifetime of the connector interface port.
Use the communication unit (CU-601, CU-621 or CU-611) when it is necessary to perform frequent
communication between the host computer and BHT.
Avoid inserting the connector at an angle or pulling the cable strongly.
To Next Page
Loading...
