Denso BHT-604Q - Bht-604 Q Chapter 2 Bht Preparation; Table of Contents

BHT-
60
4
Q
This chapter describes inserting and charging the battery cartridge, turning the BHT
power ON and OFF, and use of the hand strap.
Chapter 2
BHT Preparation
2.1 “BHT Preparation” Procedure·····································································12
2.2 Loading and Charging the Battery Cartridge ··············································12
2.2.1 Battery Power Level Indicator ··························································18
2.3 Attaching the Hand Strap············································································19
2.3.1 Attaching the Hand Strap ·································································19
2.3.2 Holding the BHT···············································································19
2.4 Initial Setup·································································································20
2.5 Turning OFF the Power ··············································································21
2.5.1 Normal Power OFF ··········································································21
2.5.2 Turning the Power OFF after Data Back-up ·····································21
2.5.3 Auto Power OFF ··············································································21
2.5.4 If the BHT Is Shut Down Abnormally ················································22
2.5.5 If Invalid Files Are Found··································································24