131
2D Code Handy Terminal
When the Displayed File Name Differs from the BHT Sys
If the name of the file displayed at [2: FILENAME] differs from the name of the BH
tem Update File
T system update file to
ile name.
M
key.
he mode changes to entry mode and the cursor displays.
2. orrect file name.
eric entry (no gui
o delete ingle character, press the BS key.
ress the C key to delete all entries made.
3. ress the ENT key to set the entered file name.
e BHT System
te file does
not exist when updating the BHT system.
again.
be used for updating the syst
em, enter the correct f
1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: FILENA E] and then press the ENT
dance display) and alphabet
T
Use the numerical keys and dot key to enter the c
Press the SF and the BS key to change the entry mode (num
entry).
a sT
P
P
If the System Update File Does not Exist when Updating th
The screen displays as shown on the right If the system upda
Download the BHT system update file and update the BHT system
Press the C key to return to the MODIFY MENU.
To Next Page
Loading...
