EasyManua.ls Logo

Denso BHT-604Q - Page 162

Denso BHT-604Q
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
150
BHT-604Q
7.1 System Errors
The error messages that display on the screen and the causes and countermeasures to be taken if an error occurs
when the power is turned ON or while running a program are shown below.
Message BHT Response Cause Countermeasure
If this error occurs, the BHT
beeps five times and then turns
itself off.
A System Program error has
occurred.
Contact your system
administrator.
If low battery is detected, the
BHT beeps three times. After
that, it will resume previous
regular operation.
The battery output level has
dropped below a specified
lower limit.
Replace or recharge the battery
cartridge.
If this error occurs, the BHT
beeps five times and then turns
itself off.
Depending upon the battery
level, the beeper may not sound
five times.
The battery output level has
lowered so that the BHT no
longer operates.
Replace or recharge the battery
cartridge.

Table of Contents

Related product manuals