Barcode Handy Terminal
[1] Barcode reading test
Use the following procedure to perform a barcode reading test.
1. Select“1:BARCODE”attheTESTmenuandthenpressthe
ENTkey.
The screen displays as shown on the right.
2. Read a barcode with the BHT
Upon completion of barcode reading, the speaker beeps once, and the
indicator LED turns blue.
Barcode type
3. The read barcode type, number of digits, and data display at the screen. Ensure that the
barcode data and screen display match.
Press the BS/C key to return to the TEST menu.
Barcode Type and Corresponding Characters Displayed on the Screen
Number of digits in the barcode
Barcode Type ID Characters
EAN-13, UPC-A
EAN-8
UPC-E
Standard 2of5 (STF)
Interleaved 2of5 (ITF) *
A
B
C
H
I
Codabar (NW-7)
Code 39
Code 93
Code 128
GS1-128 (EAN-128)
RSS (GS1 DataBar)
N
M
L
K
W
R
Barcode data
∗ With ITF, a barcode with 4 or more digits is read.
89
To Next Page
Loading...
