Denso BHT-805B - System Mode Basic Operation


BHT-805B
4.4.2 System Mode Basic Operation
Menu Selection and Display
Use the following procedure to select and display each menu.
 Operation example
1. Press the numerical key
corresponding to the menu to
be selected.
Alternatively, press the cursor
keys ([▲] [▼]) to select the
menu.
The selected menu item will be
highlighted.
”SETUP” will be highlighted when
System Mode is started up.
2. Press the ENT key.
The selected item is set and the
next screen displays.
Press the BS/C key to return to
the previous screen.
The selected item will be
highlighted when returning to the
previous screen.
Select [4: SET SYSTEM] with
the [4] or [▲]/[▼] keys.
Select [2: DISPLA
[2] or [
Y] with the
▲]/[▼] keys.
ENT key
BS/C key
[BS/C] key
Select [4:SET SYSTEM] with
the [4] or [▲]/[▼] keys.
Select [5:COMMUNICATION]
with the [5] or [▲]/[▼] keys.
3. Repeat the above operation to
display the target menu.
44