BHT-
B
Chapter 2
BHT Preparation
This chapter describes inserting and charging the battery cartridge, turning
the BHT power ON and OFF, and use of the hand strap.
2.1 “BHT Preparation” Procedure ·····································································12
2.2 Inserting and Charging the Battery Cartridge ·············································12
2.2.1
Battery Power Level Indicator ········································································18
2.3 Wearing the Hand Strap ·············································································19
2.3.1
Attaching the Hand Strap ···············································································19
2.3.2
Holding the BHT·····························································································19
2.4 Initial Setup·································································································20
2.5 Turning OFF the Power ··············································································21
2.5.1
Normal Power OFF ························································································21
2.5.2
Turning the Power OFF after Data Back-up ··················································21
2.5.3
Auto Power OFF ····························································································21
2.5.4
If the BHT Is Shut Down Abnormally······························································22
2.5.5
If Broken Files Are Found ··············································································24
To Next Page
Loading...
