EasyManua.ls Logo

Denso BHT-805B - 6.1 Replacing the Battery Cartridge

Denso BHT-805B
179 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BHT-805B
6.1 Replacing the Battery Cartridge
6.1.1 Battery Cartridge Service Life
The battery cartridge is a consumable part and should be replaced after being charged approximately 300
times.
The performance of the battery cartridge’s lithium-ion battery will deteriorate gradually with repeated
charging, even during normal use. When the battery operation time becomes shorter even after charging
for the specified length of time, replace the battery with a new one.
6.1.2 Battery Cartridge Replacement Method
1. Press the power key ( ) to turn OFF the BHT.
The screen displays as shown on the right.
Point Do not remove the battery cartridge until the
power turns OFF itself and the message on the
screen given to the right is cleared.
2. Slide the battery cover lock (1) in the direction indicated
by the arrow and remove the battery cover (2), and then
remove the battery cartridge (3).
3. Insert a new battery cartridge in direction indicated by the
arrow.
(Refer to Chapter 2 BHT Preparation 2.2 Inserting and
Charging the Battery Cartridge.)
Point Do not use battery cartridges othe
r
than those specified by DENSO
WAVE.
140

Table of Contents

Related product manuals