Denso BHT-805B - Setting the Remote Wake-Up (SET REMOTE WAKEUP Menu)

Barcode Handy Terminal
4.5.13 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu)
Use the following procedure to perform remote wake-up settings.
1. Press the 4 key while holding down the SF key at the SYSTEM MENU.
The SET REMOTE WAKEUP menu displays as shown on the right.
[1: REMOTE WAKEUP]:
Enables or disables remote wake-up.
[2:TRANSMIT SPEED]:
Sets the transmission speed for remote wake-up.
Press the BS/C key to return to the SYSTEM MENU.
2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highlight
the item to be set.
3. Highlight the settings with the cursor keys ([◄] [►]) and press the
ENT key.
Press the BS/C key to return to the SYSTEM MENU.
125