Barcode Handy Terminal
4.1.1 Selecting the Memory Area to be Initialized
1. Press the Power key ( ) while holding down the SF, M1 and 0
keys together.
The screen displays as shown on the right.
2. Select the memory area to be initialized.
(1) To exempt font files from deletion:
Ensure that “1:USER AREA EXCEPT FONTS” is selected and press the ENT key.
The screen changes to the “4.1.3 Confirming the Memory Area Selected for Initialization”.
(2) To delete font files:
Press the 2 key while holding down the SF key.
The screen displays as shown on the right.
Next, press the 2 key, select “2:WHOLE USER AREA”, and press the ENT
key.
The screen changes to the “4.1.2 Selecting the Message Version (English
or Japanese)”.
“1: USER AREA EXCEPT FONTS”
The user area is initialized without deleting file fonts.
“2: WHOLE USER AREA”
The entire user area is initialized and therefore file fonts are also
deleted.
- Point - If a “Contact the administrator. (2XXX)” message displays when the BHT power is ON,
select ”2: WHOLE USER AREA”.
35
To Next Page
Loading...
