Barcode Handy Terminal
3.4 Changing the Default Settings
The volume, vibrator, LCD display brightness and power save settings can be changed at the MENU screen.
Item Details Setting
VOLUME
Used to set the volume of the speaker that notifies the user
when barcode reading is complete.
The volume can be adjusted in 4 levels: Hi, Lo, Mid and Mute.
Mute→Lo→Mid→Hi
VIBRATOR
Used to turn ON/OFF the vibrator that notifies the user when
barcode reading is complete.
ON, OFF
BRIGHTNESS
Used to set the backlight brightness of the LCD display.
The brightness can be adjusted in 5 levels.
Levels 1 to 5
BRIGHTNESS(PS)
Used to set the backlight brightness of the LCD display during
power save mode. The brightness can be adjusted in 6 levels.
Levels 0 to 5
POWER SAVE
Used to set the time until the LCD display backlight is dimmed
when not in use in order to save power.
1-second units
(max. 30 seconds)
3.4.1 Procedure
1. Hold down magic key M1 for at least 1 second.
The MENU screen displays
29
To Next Page
Loading...
