Barcode Handy Terminal
[6] File test
The file test allows detailed information on program files, data files, audio files (*.WAV), and image
files(*.JPG) to be checked. In addition, pressing the M1 key sorts the files.
1. Select “6: FILE” at the TEST menu and then press the
ENT key.
The right screen is displayed. If any of the stored files are
broken, an asterisk (*) or plus sign (+) is prefixed to the name
of the defective file (s).
Refer to [About “$$BRKLST.SYS”] of “2.5.4 If the BHT Is Shut
Down Abnormally” for details about the (*) and (+).
“SIZE: bbbbb”: Used memory size
“FREE: yyyyy”: Available memory size
Files can be sorted each time the M1 key is pressed.
“TYPE”: Sorts files by type.
“BROKEN”: Displays broken files in descending order.
“BASIC”: Displays files in the following order: “B：BASIC
files”, “C: C data files”, 「None: Shared files and program files.”
━ Point ━
2. Select a file, and then press the ENT key.
The selected file will be set, and then the menu will return to
the previous screen.
Press the BS/C key to return to the previous screen.
When returning to the previous screen, the selected item will
be highlighted.
・ When a file contains an abnormality, the
file must be deleted, or overwritten with a
file of the same name.
・ Even files containing abnormalities can
be uploaded with the upload menu. It is
recommended to delete important files
after uploading.
M1 key
BS/C key
M1 key
ENT key
BS/C key
BS/C key
M1 key
97
To Next Page
Loading...
