Barcode Handy Terminal
◆ Other files (*.DAT, *.TXT, etc.)
1. Use the cursor keys ([▲] [▼]) to select a file, and then press the ENT key.
If field information is available, press the F1 key to display the next screen. To
return to the previous screen, press the F1 key again, or press the BS/C key.
In addition, when there are four or more fields, “MORE FIELD LEN” and a
If field information is not available, the screen to the right will display.
ress the BS/C key to return to the previous screen.
guide will display.
P
Switch with the F1 key
101
To Next Page
Loading...
