BHT-805B
[2] CU-811 System Information Display
Use the following procedure to display CU-811 system information.
1. Place the BHT on the CU-811.
2. Select “6: VERSION” at the SYSTEM MENU and then press
the ENT key.
The SYSTEM INFORMATION screen on the right displays.
3. Press the M2 key.
The CU-811 INFORMATION screen displays.
[SYSTEM Ver.]: System program information
[MAC ADDRESS]: MAC address
Press the M1 key to return to the SYSTEM INFORMATION screen.
If the M2 key is pressed when the BHT is not on the CU-811, the screen
displays as shown on the right.
Press the BS/C key to return to the SYSTEM INFORMATION screen.
112
To Next Page
Loading...
