Barcode Handy Terminal
[1] Downloading the BHT system parameter file
1. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
DOWNLOAD] and then press the ENT key.
The screen displays as shown on the right indicating that the BHT is
waiting for the system parameter file to be downloaded.
2. While the download is in progress, the screen displays as shown on
the right indicating the file name and the number of received
records/the total number of records.
Press the BS/C key to abort the download and return to the SYSTEM
PARAMETER menu.
3. Upon completion of downloading, the BHT displays the screen
shown on the right and the speaker beeps once.
Press the BS/C key to return to the SYSTEM PARAMETER menu.
The speaker sounds three times if an error occurs during downloading, and
an error screen displays.
Refer to “Chapter 7 Error Messages” - “7.2 System Mode Errors” and
remedy the error.
123
To Next Page
Loading...
