Denso BHT-805B - Page 80

Barcode Handy Terminal
3. Simultaneously press the SF key and “1: MESSAGE” at the SET
DISPLAY menu.
The SET DISPLAY menu on the right displays.
The highlighted settings will be the current settings.
4. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to
highlight ”1: MENU” or ” 2: COMPATIBLE MODE”.
5. Highlight the target setting with the cursor keys ([◄] [►]) and press
the ENT key.
Press the BS/C key to return to the SET SYSTEM menu.
“1: MENU”:
Sets whether to permit or prohibit the menu screen (speaker volume, vibrator, screen brightness, power
saving) starting up while application program is running.
• “ON”: Permits menu screen display.
• “OFF”: Prohibits menu screen display.
“2: COMPATIBLE MODE”:
Sets compatible mode for screen display with the BHT-100, BHT-300, or BHT-7500.
This allows BHT-100 Series, BHT-300 Series, or BHT-7500 Series application programs to run at the
BHT-805B without changing or correcting the font size.
BHT-300 BHT-7500 BHT-100
Standard
font
22 x 9 char.
(6 x 8 dots)
26 x 20 char.
(6 x 8 dots)
16 x 25 char.
(12 x 12 dots)
Small
font
ANK
mode
22 x 12 char.
(6 x 6 dots)
26 x 26 char.
(6 x 6 dots)
16 x 25 char.
(12 x 12 dots)
Standard
font
8 x 4 char.
(16 x 16 dots)
10 x 10 char.
(16 x 16 dots)
12 x 19 char.
(16 x 16 dots)
Small
font
Kanji
mode
11 x 6 char.
(12 x 12 dots)
13 x 13 char.
(12 x 12 dots)
16 x 25 char.
(12 x 12 dots)
Font Size
Screen mode
Reduced
Kanji
11 x 4 char.
(12 x 16 dots)
（Not supported） (Not supported)
67