48
UPC-A/E, EAN-13/8
Items Parameters Defaults Refer to:
Enable √
Scanning UPC-A, UPC-E, EAN-13 and
EAN-8
Disable
Enable
Scanning UPC/EAN with 2-digit add-on
Disable √
Enable
Scanning UPC/EAN with 5-digit add-on
Disable √
Enable √
Transmission of the number system character
of UPC-A
Disable
Enable √
Transmission of the number system
character of UPC-E
Disable
Enable √
Transmission of the pad character "0" for
the specified number of digits of UPC-A
Disable
Enable
Transmission of the pad character "0" for
the specified number of digits of UPC-E
Disable √
Enable √
Transmission of a check digit for UPC-A
Disable
Enable √
Transmission of a check digit for UPC-E
Disable
Enable √
Transmission of a check digit for EAN-13
Disable
Enable √
Transmission of a check digit for EAN-8
Disable
Enable conversion
Transmission format of EAN-8
(Conversion to EAN-13)
Disable conversion √
Enable conversion
Transmission format of UPC-E
(Conversion to UPC-A)
Disable conversion √
Section 11.3 (5)
Enable √
Transmission of country code for EAN-13
Disable
Section 11.3 (5)
(See Note 2.)
Enable
Conversion to ISBN/ISSN format
for EAN-13
Disable √
Section 11.3 (5)
(Note 2) A country code is in the upper two digits of the prefix character field in EAN-13.
: Can be changed only with the configuration software.
To Next Page
Loading...
