DESKO PENTA Scanner - Security Advices and Handling Rules; Battery Pack: Technical Overview; Technical Data; Dimensions

Technical Specification DESKO PENTA Scanner
®
& Page 29 of 37
DESKO PENTA Scanner
®
BGR & DESKO PENTA Scanner
®
CKI
12.3 Security Advices and Handling Rules
Do not crush, heat, incinerate, short circuit, dismantle or immerse the battery in any liquid.
Otherwise, it may vent or rupture. Follow charging instructions. Do not charge below 0 °C.
Discharge -20 °C to +60 °C. Tested and approved to UN 38.3.
Detailed information can be found in the Quick Installation Guide which is shipped with the
battery pack.
12.4 Battery Pack: Technical Overview
12.4.1 Technical Data
Nominal Voltage:
7.4 V
Charge Voltage:
max. 8.4 V
Charge Temperature:
0 °C - 40 °C (32 °F - 104 °F)
Do not charge below 0°C!
Discharge Temperature:
-20 °C - +60 °C (-4 °F - +140 °F)
Nominal Capacity:
15.40 Ah
Minimum Capacity:
15.05 Ah
Energy:
113 Wh
12.4.2 Dimensions
Footprint:
Detailed dimensional drawing is available upon
request.
192 mm (7.56 inches) x 142,6 mm (5.61 inches) x
30 mm (1.18 inches)
Weight:
approx. 940 g (33.16 oz)
12.5 Battery Adapter: Technical Overview
12.5.1 Dimensions
Footprint:
Detailed dimensional drawing is available upon
request.
219,9 mm (8.66 inches) x 143 mm (5.63 inches) x
48,7 mm (1.92 inches)
Weight:
approx. 300 g (10.58 oz)