Technical Specification DESKO PENTA Scanner
®
&
Page 5 of 37
DESKO PENTA Scanner
®
BGR & DESKO PENTA Scanner
®
CKI
1.3 Package Content
• DESKO PENTA Scanner
®
, DESKO PENTA Scanner
®
BGR, DESKO PENTA Scanner
®
CKI
• Power supply (5 V DC), different country versions
• USB 2.0 cable
• Quick Installation Guide with the link and log-in data for the DESKO PENTA Scanner
®
,
DESKO PENTA Scanner
®
BGR, DESKO PENTA Scanner
®
CKI download area. Within the
download area you will find all relevant documents for the PENTA Scanner and
necessary tools and drivers.
2 Introduction
This guide describes the standard use of the DESKO PENTA Scanner
®
, DESKO PENTA Scanner
®
BGR and the DESKO PENTA Scanner
®
CKI. Detailed information on the respective
configuration can be found in the Quick Installation Guide, which is shipped with the device.
Please contact
support.desko.com should you have not received a Quick Installation Guide
or need access to our
download area.
The DESKO PENTA Scanner
®
is a full-page scanner designed to be used in self-service and
agent operated environments. As an intelligent device, it supports OCR, barcode and
magnetic stripe reading (depending on hardware configuration) within the device itself. It
therefore reduces the required performance on the host system itself.
Depending on the hardware configuration, the device supports reading of:
• Machine-readable zone of OCR documents according to ISO/IEC 7501-1, ICAO 9303
and ISO 18013 (e.g. ID cards, passports, visas and driver licenses)
• 1D and 2D barcode documents printed on paper or presented on displays e.g.
smartphone
• RFID documents according to ISO 14443 (A/B), ISO 7816 (incl. US passport), ICAO
9303 as well as full NFC support
• Magnetic stripe documents according to ISO 7811/2-5
• Chip card documents according to ISO 7816 and EMV² 2000 level 1
Front view of DESKO PENTA Scanner
®
Back view of DESKO PENTA Scanner
®
To Next Page
Loading...
