To Next PageTo Next PageWhat to do if “No tool” appears on Desoutter Delta 7D Delta display?
If the Delta display shows “No tool” when you access the Tools menu, it means that no tool has been defined. To resolve this, create at least one tool with a Pset associated to start a test.
What to do if “No Pset available” appears on Desoutter Measuring Instruments Delta display?
If the Delta display shows “No Pset available” when selecting a tool, it means that the tool has no Pset associated with it. To fix this, associate at least one Pset to the tool.
What does “Capacity error” mean on Desoutter Delta 7D Delta display?
A “Capacity error” on the Delta display during a test indicates that the transducer's capacity is not adequate for the test. The solution is to use a transducer with a higher capacity.
What to do if “No more Psets available” appears on Desoutter Measuring Instruments Delta display?
If the Delta display shows “No more Psets available” when starting a test, it means the tool has been deleted. To solve this, exit the test menu and create a tool with at least a linked Pset.
What does “Transducer not suitable” mean on Desoutter Measuring Instruments Delta display?
If the Delta display shows “Transducer not suitable”, it means an incompatible transducer is being used for the test, such as a static transducer for a test requiring angle measurement. To resolve this, connect a compatible transducer for the test.
What does “Min Load Error” mean on Desoutter Measuring Instruments Delta display?
If a “Min Load Error” appears on the Delta display when starting a test, it means that the Pset and transducer data are not matching. To fix this, check both the transducer and the Pset data to ensure they are compatible to start the test.
What to do if test result is always Not OK when testing a tool on Desoutter Delta 7D Measuring Instruments?
If the test result is always Not OK or the click-point of a wrench is never detected when testing a tool with Desoutter Measuring Instruments, ensure you are using the proper setup. Check and, if necessary, modify the test setup parameters; the thresholds are the most critical parameters.
Why can't I connect the DeltaQC to the Desoutter Delta 7D Delta?
If you cannot connect the DeltaQC to the Delta, it might be due to a wrong connection type. When clicking on the Connect icon, make sure that the USB or Network is selected. To select the connection method, click on the arrow on the right side of the icon.
How to fix cannot enter the test menu on Desoutter Delta 7D?
If you cannot enter the test menu on your Desoutter Measuring Instruments, it may be because the transducer is not connected. Connect a valid transducer to the Delta, ensuring that the cable is also the correct one.
General| Brand | Desoutter |
|---|---|
| Model | Delta 7D |
| Category | Measuring Instruments |
| Language | English |
Emphasizes reading safety information before use and attention to safety instructions.
Provides step-by-step instructions for installing the DeltaQC software on a PC.
Describes how to establish connections between the Delta and the PC via USB or Ethernet.
Outlines the sequence for executing tool, joint, and production tightening tests on Delta 6D/7D.
Describes how to set main parameters and control strategies for a Pset in DeltaQC.
Details parameters related to torque and angle measurement for test strategies within a Pset.
Details the configuration parameters for performing a click-wrench test on the Delta.
Details the configuration parameters for performing a peak test on the Delta device.
Guides users on configuring parameters for nutrunner tests, including thresholds and peak monitoring.
Explains how to configure parameters for testing pulse tools on the Delta device.
Details the configuration for testing pulse tools with preload, focusing on load measurements.
Describes how to set up parameters for the free angle test strategy on Delta 6D/7D.
Provides formulas and methods for calculating statistical parameters used in tests.
Explains how to calculate the torque correction coefficient when using extension spanners.
Guides on calculating the angle correction coefficient to compensate for extension torsion.
Explains how to perform hardware checks and diagnostics on the Delta device.
