Deutz 2012 - Other Preparations

3.1 Commissioning
3.1.3 Filii Bleed Cooling System
• 2012: In accordance with the radiator suppli-
er's specifications
• Unit
engine: In accordance with the radiator
supplier's specifications
3.1.4 Other Preparations
• Check battery and cable connections, see
6.7.1 .
• Trial run
-After the engine has been prepared, carry out
abrief trial run for approx. 10 minutes, without
load if possible.
During and after the trial run
- Check the engine for leaks.
After the engine has been turned off
- Check oil level and top up if necessary,
see 6.1.2.
- Retension V-belts, see 6.5.
• Breaking in
During the break-in phase -about 200 operat-
ing hours - check the oil level twice a day.
After the engine is broken in, checking once a
day
will be sufficient.
• In the event of commissioning engines
which have been preserved
Carry out removal of preservation in accord-
ance with Chapter 8.1.
Engine Operation
('I")
o
o
N
@