Deviser TC500 - Settings

TC500 Ethernet Cabling Certifier Operation Manual
9
6. Settings
The following sections describe how to set the items of this instrument.
In the main menu, press SETTING (F2) soft function key to enter setting menu. Settings have two menus, users can use “Go to Next
Page” function button on the first menu and “Go to Previous Page” function button on the second menu to change
between two settings menus.
Figure5 SETTING menus
Users can set these items below:
 Test Configuration
 NVP
 Language & Unit
 Job information
 Job Templates
 Time and Date
 LCD/System Power
 LCD Brightness
 Config. Management