TC500 Ethernet Cabling Certifier Operation Manual
33
10. Charge
When the power of main unit battery is low, the battery status icon on every menu will blink, users should connect the AC adapter
to the AC adapter connector of the main unit. The Charging LED will be on when charging. It will take about 5 hours to charge main
unit full.
When the power of remote unit battery is low, the Low Battery LED will be on, users should connect the AC adapter to the AC
adapter connector of the remote unit. The Charging LED will be on when charging. It will take about 5 hours to charge remote unit
full.
The main unit and remote unit will automatically shut down when the power of battery is low enough.
To Next Page
Loading...
