Dewetron EPAD2 Series User Manual

11
EPAD2/CPAD2/CPAD3 series modules • Technical Reference Manual • Printing version 1.0.2 • October 04, 2016
Calibration information
All DEWETRON modules are calibrated at 25 °C and meet their specications when leaving the factory.
The time interval for recalibration depends on environmental conditions. Typically, the calibration should be
checked once a year.
Calibration certicates are available from DEWETRON as an option. DEWETRON offers two types:
ISO traceable DEWETRON certicate
Calibration certicate according to ÖKD (equivalent to DKD)
This manual contains no calibration information. For self calibration, there is a seperate calibration kit
available. The CAL-KIT contains the required cables, software and instructions.
General module specications
Environmental:
Temp. range storage: -30 °C to +85 °C (-30 °F to 185 °F)
Temp. range operating: -5 °C to +60 °C (-4 °F to 140 °F)
Enhanced temp. range: on request
Relative humidity (MIL202): 0 to 95 % at 60 °C, non-condensing
RFI susceptibility: ±0.5 % span error at 400 MHz, 5 W, 3 m
All modules are produced according ISO9001 and ISO14001.
General module information
General module information

Dewetron EPAD2 Series Specifications

General

Brand	Dewetron
Model	EPAD2 Series
Category	Control Unit
Language	English