68
Accessories
Accessories & Options
General accessories and options for xPAD2 modules
EPAD-BASE2 Multifunction BASE module for
connecting EPAD modules to USB - recognizes USB communication losses and
reports them back to DEWESoft (native USB device, use with DEWESoft only!)
connecting EPAD modules to RS-232
transforming EPAD / PAD data to CAN
LEMO EGG.1B.304 socket for EPAD,
incl. external power supply 100 to 240 VAC / 15 VDC (for up to 16 EPAD modules)
XPAD-TERM-L Termination connector for xPAD2/CPAD3 modules with Lemo EGG.1B.304
connector, the last module of the RS-485/CAN bus must be terminated with
this connector.
XPAD-CBL-LL-0.2 xPAD2/CPAD3 connecting cable 0.2 m with Lemo FGG.1B.304 connector on both
sides, for daisychaining stacked xPAD2/CPAD3 modules.
XPAD-CBL-LL-0.5 xPAD2/CPAD3 connecting cable 0.5 m with Lemo FGG.1B.304 connector on both
sides, for connecting xPAD2/CPAD3 series modules to an instrument with
Lemo EGG.1B.304 EPAD interface or to EPAD-BASE2 or for daisychaining
xPAD2/CPAD3 modules.
XPAD-CBL-LL-2 xPAD2/CPAD3 connecting cable 2 m with Lemo FGG.1B.304 connector on both
sides, for connecting xPAD2/CPAD3 series modules to an instrument with Lemo
EGG.1B.304 EPAD interface or to EPAD-BASE2 or for daisychaining xPAD2
modules
XPAD-CBL-LL-5 xPAD2/CPAD3 connecting cable 5 m with Lemo FGG.1B.304 connector on both
sides, for connecting xPAD2/CPAD3 series modules to an instrument with Lemo
EGG.1B.304 EPAD interface or to EPAD-BASE2 or for daisychaining xPAD2/CPAD3
modules
XPAD-CBL-LL-10 xPAD2/CPAD3 connecting cable 10 m with Lemo FGG.1B.304 connector on both
sides, for connecting xPAD2/CPAD3 series modules to an instrument with Lemo
EGG.1B.304 EPAD interface or to EPAD-BASE2 or for daisychaining xPAD2/CPAD3
modules
EPAD-ADAP-BL Adapter cable 0.1 m, converts Binder 712-series plug to Lemo 1B.304 socket
required to connect new xPAD2 modules to old instruments with Binder
712-series EPAD interface using EPAD-CBL-LL-x cables.
required to connect EPAD modules with Binder 712-series connector to new
instruments with Lemo EGG.1B.304 EPAD interface using
EPAD-CBL-LL-x cables.
To Next Page
Loading...
Need help?
General
