Dexcom stelo - Remove Old Sensors from Bluetooth Connections (Optional)

Remove old sensors from Bluetooth connections
(optional)
Before inserting a new sensor, remove old sensors from your smartphone's list of
Bluetooth connections.
There may be more than one sensor listed because your smartphone saves each
sensor as a new device in the Bluetooth connections list.
Apple
1.
Go to Phone Settings > Bluetooth.
2.
Find a used sensor in My Devices list. Stelo names start with DXCM.
3.
Tap i to see details about this sensor.
4.
Tap Forget This Device.
Android
1.
Go to Phone Settings > Connections > Bluetooth.
2.
Find your used sensors in the list of paired devices. Stelo Glucose Biosensor
names start with DXCM.
3.
Tap Settings to see details about the connection.
4.
Tap Unpair.
64