DIMAX804KC User’s Manual
DEXON Systems
23
device_info - Reply
Reply message:
<device_info>
<type>{DIMAX804K|...}</type>
<state>{Ready|Error}</state>
<num_presets>n</num_presets>
<num_layouts>n</num_layouts>
<num_inputs>n</num_inputs>
<num_outputs>n</num_outputs>
<num_overlays>n</num_overlays>
<num_network_adapters>n</num_network_adapters>
<num_mediaplayer_events>n</num_mediaplayer_events>
<num_scheduler_events >n</num_scheduler_events>
<transition_effect>Cut</transition_effect>
<transition_effect>Fade</transition_effect>
<open_effect>Cut</open_effect>
<open_effect>Fade</open_effect>
<close_effect>Cut</close_effect>
<close_effect>Fade</close_effect>
<scheduler_type>RecallLayout</scheduler_type>
<scheduler_type>TextOverSerialPort</scheduler_type>
<scheduler_type>HexOverSerialPort</scheduler_type>
<input id="n">
<decoder>{DX804K-IN}</decoder>
<fw required="n.n.n.n" current="n.n.n.n" />
<port>HDMI</port>
<audio_port>Embedded</audio_port>
<audio_port>Analogue</audio_port>
<media_player/>
<hdcp_config/>
<edid_config/>
<enable/>
<volume/>
</input>
...
<output id="n">
<fw required="n.n.n.n" current="n.n.n.n" />
<enable_cap>{Yes|No}</enable_cap>
<frame_cap>{Yes|No}</frame_cap>
<opacity_cap>{Yes|No}</opacity_cap>
<custom_timing_cap>{Yes|No}</custom_timing_cap>
<rotation_cap>{Yes|No}</rotation_cap>
<audio_port>Embedded</audio_port>
<audio_port>Analogue</audio_port>
<port>HDMI</port>
<output_modes>
<mode id="{resolution_id}">{1920x1080@60Hz|...}</mode>
...
</output_modes>
</output>
...
</device_info>
Description:
The DIMAX server sends this reply message to the client in response to the query_device_info
request.
To Next Page
Loading...